Single layer sintered wire mesh can eliminate the shedding of wire during fabrication and working abrasion.
Two layer sintered wire mesh can give support for the functional stainless steel filter mesh and get better performance.
The customizable three layer sintered wire mesh Lianda Filter manufacture and supply will bring more possibility to this metal filter media:
- Flat surface and enough thickness
3 layer sintered wire mesh side view and the shadow
- Even higher strength with extra perforated metal layer
3 layer sintered wire mesh fine square mesh with perforated metal
- Workable extremely fine mesh with high strength support. 400, 500 or 600 mesh square weave is possible.
3 layer sintered wire mesh side view and the shadow
- Sandwiched by perforated metal layer for toughest working pressure
3 layer sintered wire mesh square mesh sanwiched with perforated metal
- Fine mesh sandwiched by coarse mesh to produce pleated filter element. 1 2 5 10 15 20 25 micron available.
3 layer sintered wire mesh pleated filter element
With one more layer in the structure, the stainless steel 3 layer sintered wire mesh has wider application range than 2 layer sintered metal mesh.
It can be used as filter disc, filter tube, filter basket, filter cartridge and other filter element in candle filter housing, filter dryer, sieve, strainer, valve and other equipment.
Do you have problem with your wire mesh filter product?
Or the 2 layer sintered wire mesh does not 100% perfectly fit your application?
Contact us to check if the 3 layer sintered metal mesh is a better choice.