Cutting is essential for controlling the size of the sintered wire mesh and metal filter elements. We use Laser / EDM cutting and punching based on different requirement.

Laser cutting is fast and effective for the sintered wire mesh, with accuracy of 1/100 to 1/10 millimeter.

Laser cutting of 2.0m diameter sintered metal mesh filter disc on a laser cutting platform

Laser cutting of sintered metal mesh filter disc

We use wire EDM (electrical discharge machining) method to cut the sintered wire mesh, for higher dimension tolerance up to 1/100 mm.

Picture: wire EDM or filter disc

Punching is the best choice, if the sintered wire mesh or wire mesh need to be cut into profiled shape in hundreds or thousands pieces, while the dimension tolerance is moderate.

Picture: punching.